PK-900, DSP-2232 Command Summary
- AMTOR - CMD: AM
CASedisp set to 2 will force UPPER CASE and save problems.
If you
do not use that, BE SURE to press the CAPS LOCK key.
|
|
|
FEC |
FEC (Enter) |
to XMIT |
|
CTRL-D |
to Receive |
|
|
|
ARQ |
ARQ [SELCAL] |
to CONnect |
|
+? (Enter) |
to Receive |
|
CTRL-D |
to DISConnect |
|
|
|
|
AL (Enter) |
to Listen |
- PACTOR - CMD: PT
Is NOT case sensitive, therefore CASdisp 1.
|
|
|
FEC |
PTS(end) |
to XMIT |
|
CTRL-D |
to End Xmit |
|
PTL |
to LISTEN |
Note: When you go back to receive, if you have set the PTRound
parameter to ON, the TNC will automaticly go to PTL and save having to
enter the PTL at each receive. However the VHF access via
Gateway will not function until you turn PTR off again.
|
|
|
ARQ |
PTC [call] |
to CONnect |
|
CTRL-Z |
changeover |
|
CTRL-D |
to DISConnect |
|
CTRL-C R |
Immed. Discon. |
Note:
PTL(isten) will monitor and
TNC parameter PTR ON will
automaticly return to PTL after CTRL-D.
- RTTY - CMD: BA
- SETTINGS:
- RBAUD 45
- RXREV OFF
- TXREV OFF
- MODEM 1
- QRTTY (Automaticly selects modem when starting with RTTY)
- DIDdle OFF
- X (Enter) to Xmit
- CTRL-D to Receive
- CTRL-C R Force END OF CONTACT
- MAIL-DROP Operation
- TOR mail - TM(ail) ON
- Packet - MA(ildrop) ON
- GATEWAY Operation
- PTR(ound) = OFF!
Gateway will NOT function with this on.
- XGateway = ON
- OPMode = Packet, Amtor, Pactor
- RADIO 1/2 (both ports active)
- GUsers 3
- MYCAL W0IPL-5/W0IPL-6
- MYGate W0IPL-7
- Function Keys
- F2 - AMTOR on
- F3 - Gateway on
- F4 - PACTOR on
- F5 - Gateway off
- F9 - Reload Parms